Toshiba Qosmio X300 Manuel d'utilisateur télécharger pdf (Page 107)

User’s Manual 4-43

Operating Basics

Connecting the modular cable

To connect the modem's modular cable, follow the steps as detailed below:

1. Plug the end of the modular cable into the computer's modem jack.

2. Plug the other end of the modular cable into a telephone jack.

Connecting the internal modem

Disconnecting the modular cable

To disconnect the modular cable, follow the steps as detailed below:

1. Pinch the lever on the plug in the telephone jack and pull it out from

within the connector.

2. Pinch the lever on the plug in the computer's modem jack and pull it out

from within the computer.

Wireless communications

The computer's wireless communication function supports both Wireless

LAN and Bluetooth devices.

All models are provided with Wireless Communication switch. Some

models are equipped with both Wireless LAN and Bluetooth functions.

■ Connection to any communication line other than an analog phone line

could cause a computer system failure.

■ Connect the built-in modem only to ordinary analog phone lines.

■ Never connect the built-in modem to a digital line (ISDN).

■ Never connect the built-in modem to the digital connector on a

public telephone or to a digital private branch exchange (PBX).

■ Never connect the built-in modem to a key telephone system for

residences or offices.

■ Avoid using your computer modem with the telephone cable

connected during an electrical storm. There may be a remote risk of

electric shock from lightning.

Telephone Jack Modem Jack

Do not pull on the cable or move the computer while the cable is

connected.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 218 219

Pas de commentaire

Toshiba Qosmio X300 Manuel d'utilisateur Page 107