Toshiba IK-TF7C Manuel d'utilisateur télécharger pdf (Page 25)

About 1 µs

Exposure period*

Trigger*

Negative polarity mode

Positive polarity mode

RGB data

(video interval image)

(Internal VD)

FVAL

LVAL,

DVAL

28H (Partial scanning OFF)

38H (Partial scanning 60fps)

47H (Partial scanning 90fps)

ger, there will be an effect on the video.

(1. 2) 1 Pulse Trigger SYNC-NON RESET Picture Output Timing (at Time of Internal Sync)

*1: Externally input signal

*2: Exposure time is determined by the setting of "7. 2 (1.3) Changing each setting in E.TRG mode".

As long as there is no external sync input, the internal VD will be output when SJ01 is set to HD/VD output

position.

*3: Video is output at the falling edge of the internal VD following completion of the exposure period.

The video and FVAL/LVAL/DVAL have a paired relationship.

Note:

When the next trigger is input before completion of the output of the video corresponding to the trig-

ger, there will be an effect on the video.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Pas de commentaire

Toshiba IK-TF7C Manuel d'utilisateur Page 25