Toshiba Extended Panel TOS-SN-1 Manuel d'utilisateur télécharger pdf (Page 2)

TOS-SN-1

Γ For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-2192

Connect the Extended Panel to the inverter according to the procedure mentioned below.

1. Wait 10 minutes after the S11 is turned off to insure the drive is denergized. The

charge lamp can be used as a secondary indicator to determine if the drive is still

charged.

2. Connect the communication connectors of the extended panel to the inverter (CN1),

which has the common serial option (communication) connector, with the optional

cable.

3. Insure a secure connection is made between the inverter and the extended panel

once the connection is made.

4. Power on the inverter after connection has been made, and the display should turn

on.

Note: Before removing the cable, insure step 1 is confirmed.

Programming

Parameter Description Default Value New Value

cmod

Command mode selection

Operational Panel

fmod

Frequency setting mode selection 1

Built-in Potentiometer

Operational Panel

1 2 3 4 5 6 7

Pas de commentaire

Toshiba Extended Panel TOS-SN-1 Manuel d'utilisateur Page 2