Toshiba RDXV60 Manuel du propriétaire télécharger pdf (Page 19)

Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions

Basic Setup /

TV View Operation

Connecting to External Equipment

This unit has three input terminals. Press

[INPUT SELECT F] repeatedly to select the external input

mode, then press [PROG. G\H] repeatedly to select AV1,

AV2 or DV(AV3). Be sure that all the units are switched off

before making connections.

Note

• When you record a TV programme from a Satellite Box /

decoder, you must connect a Scart cable to AV2 (DECODER).

(See page 37.)

• The signal from the external device will be output

automatically when the TV is connected to AV1 and the

external device is connected to AV2 using a Scart cable with

its power on. (However, it will not be output when this unit’s

power is turned off.)

If you want to monitor this unit’s signal, press [DISPLAY]

or turn the external device off. (The signal from this unit can

only be monitored during playback.)

If you want to monitor the signal from other input, press

[DISPLAY], then press [INPUT SELECT F] to select the

desired external input mode, then select the desired input

channel using [PROG. G\H].

When connecting a DV-camcorder, use DV input jack of

DV(AV3) (Front).

Digital Audio for Better Sound Quality

For clear digital sound quality, use the DIGITAL

AUDIO OUT (COAXIAL) jack to connect your digital

audio equipment.

If the audio format of the digital output does not match the

capabilities of your receiver, the receiver will produce a strong,

distorted sound or no sound at all.

• Connecting multi-channel Dolby Digital decoder allows you

to enjoy the Multi-channel Dolby Digital surround system as

well as DTS decoder, Multi-channel surround system.

• After connecting to a Dolby Digital decoder, set “Dolby

Digital” to “Stream” in “Audio Out” menu. (See page 69.)

• After connecting to a DTS decoder, set “DTS” to “ON” in

“Audio Out” menu. (See page 69.)

• After connecting to a MPEG decoder, set “MPEG” to

“Stream” in “Audio Out” menu. (See page 69.)

• The audio source recorded in Dolby Digital Multi-channel

surround format cannot be recorded using an MD or DAT

deck as a digital sound.

• If not connected to a Dolby Digital decoder, set “Dolby

Digital” to “PCM” in “Audio Out” menu. Playing back a DVD

using incorrect settings may generate noise distortion and

damage speakers.

• Set “Dolby Digital” and “MPEG” to “PCM” and set “DTS” to

“OFF” in “Audio Out” menu for connecting to an MD or DAT

deck.

• You can use AUDIO OUT (L\R) jacks for the connection of

your audio system.

Recording from a DVD player, Satellite

Box or other Audio-Video equipment

with a Scart output socket (AV2)

Recording from a DV-camcorder

(DV(AV3))

AV output jack

(Scart)

Scart cable (not supplied)

AV2 (DECODER)

DUBBING VCR HDD DVD HDD DVD

PROGRAM

DUBBING

VCR

DVD

VCR

HDD

SELECT HDD/DVD

DVD

DVD HDD

HDD

DVD

USB

DV IN

DV(AV3) (Front)

DV cable

(4-pin)

(not supplied)

DV OUT

The connections illustrated above are

optional for better sound.

Connecting a Dolby Digital™ decoder,

DTS decoder or MPEG decoder

Connecting to an MD deck or DAT deck

COAXIAL

Dolby Digital decoder,

DTS decoder or

MPEG decoder, etc.

Digital audio

input jack

Coaxial cable

(not supplied)

E3TK6BD_EN.book Page 19 Wednesday, February 17, 2010 10:18 AM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

Toshiba RDXV60 Manuel du propriétaire Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD Toshiba RDXV60