Toshiba V.90 Manuel d'utilisateur télécharger pdf (Page 28)

Using the Internal Modem

Basic operation

You can enter as many commas as you need. The following

example will result in a six-second pause:

ATDT 9, ******* and press Enter.

NOTE: If you are using a PBX connection that does not wait

for a dial tone, add the X0, X1 or X3 to the AT command line.

For example:

ATX3DP 9, ******* and press Enter.

Actual usage will vary according to the host system, so

please check with the system manager.

Receiving a call

To set the number of rings before the internal modem

automatically answers the phone, set the S0 register as follows:

ATS0=* and press Enter.

The asterisk * indicates the number of rings.

See “S-Register values” on page 40 for more details.

Terminating a call

The methods for terminating a call depend on the status of the

connection.

❖ If the internal modem is dialing or has not yet gone online,

you can terminate a call by pressing any key.

❖ If the terminal is online, enter the escape code (+++), then type:

ATH and press Enter.

❖ If the remote party disconnects, the call will be automatically

cut off.

❖ If the power to the computer is cut off, the call is terminated.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 101 102

Pas de commentaire

Toshiba V.90 Manuel d'utilisateur Page 28