Toshiba 22AV600U Manuel du propriétaire télécharger pdf (Page 15)

Chapter 2: Connecting your TV

1

Connecting an HDMI™ or DVI

device to the HDMI input

The HDMI input on your TV receives digital audio and

uncompressed digital video from an HDMI source device,

or uncompressed digital video from a DVI (Digital Visual

Interface) source device.

This input is designed to accept HDCP (High-Bandwidth

Digital-Content Protection) program material in digital form

from EIA/CEA-861-D–compliant

[1]

consumer electronic

devices (such as a set-top box or DVD player with HDMI or

DVI output).

The HDMI input can accept and display VGA, SVGA, XGA,

WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz),

1080i (60Hz) and 1080p (24Hz/60Hz) signal formats. For

detailed signal specifications, see page 51.

Supported Audio format: Linear PCM, sampling rate 32/44.1/

48 kHz.

Note: To connect a PC to the HDMI input, see page 18.

To connect an HDMI device, you will need:

one HDMI cable (type A connector) per HDMI device

For proper operation, it is recommended that you use an

HDMI cable with the HDMI Logo (

To display an 1080i/60Hz signal format, you will need a

Category 2 cable. Conventional HDMI/DVI cable may

not work properly.

HDMI cable transfers both video and audio. Separate

analog audio cables are not required (see illustration).

See “Setting the HDMI™ audio mode” ( page 26).

HDMI device

TV back panel

To view the HDMI device video:

Select the HDMI 1, or HDMI 2 video input source on the

TV.*

To select the video input source, press INPUT on the remote control

( page 20). To program the TV remote control to operate other

devices, see Chapter 3.

•

−

To connect a DVI device, you will need:

one HDMI-to-DVI adapter cable (HDMI type A connector)

per DVI device

For proper operation, the length of an HDMI-to-DVI

adapter cable should not exceed 9.8 ft (3m). The

recommended length is 6.6 ft (2m).

one pair of standard analog audio cables per DVI device

An HDMI-to-DVI adapter cable transfers video only.

Separate analog audio cables are required (see

illustration).

See “Setting the HDMI™ audio mode” ( page 26).

DVI device

TV back panel

Note: To ensure that the HDMI or DVI device is reset properly,

it is recommended that you follow these procedures:

When turning on your electronic components, turn on the

TV first, and then the HDMI or DVI device.

When turning off your electronic components, turn off the

HDMI or DVI device first, and then the TV.

[1] EIA/CEA-861-D compliance covers the transmission of

uncompressed digital video with high-bandwidth digital content

protection, which is being standardized for reception of high-

definition video signals. Because this is an evolving technology, it

is possible that some devices may not operate properly with the

TV.

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

•

−

•

−

•

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 56 57

Commentaires sur ces manuels

Pas de commentaire

Toshiba 22AV600U Manuel du propriétaire Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour TV LCD Toshiba 22AV600U