Toshiba G3 TOSVERT-130 Manuel d'utilisateur télécharger pdf (Page 11)

13. If a ground cable is being used, connect the ground cable to the selected ground

point.

14. Reinstall the inverter’s cover (close and latch the door on units with hinged

doors).

DANGER! Do not operate the unit with the cover off / cabinet

door open.

15. Turn all power sources to the inverter unit ON, and verify that the inverter

functions properly. If the inverter unit does not appear to power up, or does not

function properly, immediately turn power OFF. Repeat steps 2 ∼

∼∼

∼ 4 to remove

all power from the inverter. Then, verify all connections. Contact Toshiba

International Corporation for assistance if the problem persists.

16. To perform final verification that the option ROM is installed properly, display the

value of the ROM VERSION parameter in GROUP:UTILITY PARAMETERS. This

number should match the option ROM version number that was recorded in step

1. If this parameter value does not match the option ROM version number

recorded in step 1, repeat steps 2 ∼

∼∼

∼ 4 to remove all power from the inverter,

then re-verify that the option ROM is installed properly. If the option ROM

appears to be installed properly, but the version numbers still do not match,

contact Toshiba International Corporation for further assistance.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 61 62

Pas de commentaire

Toshiba G3 TOSVERT-130 Manuel d'utilisateur Page 11