Toshiba G3 TOSVERT-130 Manuel d'utilisateur télécharger pdf (Page 24)

In order to determine the drive’s actual output frequency, the data contained in the

output frequency word (offsets 2 and 3) must first be converted from hexadecimal to

decimal, and then divided by 100. For example, if the output frequency high byte is

0x12 and the output frequency low byte is 0x34, then 0x1234 converted to decimal is

4660. Dividing this number by 100, the actual operating frequency of 46.60Hz is

obtained.

In this way, network data values of 0x0000 ∼ 0x9C40 correspond to the G3’s actual

allowable output frequency range of 0.00Hz ∼ 400.00Hz.

Table 2 : Status Word Format

Bit Function Value

0 Run / stop status 0: Stopped

1: Running

1 Run enable status 0: Run enabled

1: Stopped

2 Forward / reverse status 0: Reverse

1: Forward

3 Accel / decel #1 / #2 selection

status

0: Accel / decel #1

1: Accel / decel #2

4 Reserved Always “0”

5 Fault status 0: Faulted

1: Not Faulted

6 Reserved Always “0”

Low Byte

7 Jog mode status 0: Normal (accel/decel mode)

1: Jog mode

8 Feedback enable status 0: Feedback invalid

1: Feedback valid

9 Compulsory DC injection

braking mode

0: DC injection braking inactive

1: DC injection braking active

A Fundamental parameter

switching

0: V/F #1

1: V/F #2

B Coast stop command status 0: Normal

1: Coast to stop

C Emergency off command 0: Normal

1: Emergency off

D Reserved Always “0”

Main Circuit Undervoltage 0: Normal

1: Undervoltage

High Byte

F Reserved Always “0”

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 61 62

Commentaires sur ces manuels

Pas de commentaire

Toshiba G3 TOSVERT-130 Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Toshiba G3 TOSVERT-130