Toshiba B-443 Manuel d'utilisateur télécharger pdf (Page 32)

EO1-33013

5. SPECIFICATIONS, OPTIONS, & SUPPLIES

5.1 Specifications

5.1.1 Printer

l Type: Direct thermal or thermal transfer

l Print speed: Selectable speeds of 1.5, 2.0 or 3.0 inches per second

l Resolution: 203 DPI (8 dots per mm)

l Font styles: Five alphanumeric fonts from 0.059"H (1.5 mm) to 0.23" (6.0 mm),

expandable vertically and horizontally up to 8x. Smooth fonts may

be downloaded from “ Label Design”

l Bar codes: Code 39, Code 93, Code 128 UCC, Code 128 (Subsets A, B and

C), Codabar, Interleaved 2 of 5, EAN-8, EAN-13, UPC-A, UPC-E,

EAN and UPC with 2 or 5 digit add-on, Postnet

l 2D bar codes: Maxicode, PDF-417, DataMatrix

l Graphics: Mono PCX format

5.1.2 Indicators and Buttons

l Indicators: PWR., ON-LINE, ERR.

l Buttons: POWER, PAUSE, FEED,

Note:The functions of buttons and LEDs can be redefined by commands.

5.1.3 Communication Interface

l Communications: RS-232C(DB-9) at 2400, 4800, 9600 or 19200 baud and

standard Centronics interface.

l Character set: ANSI ASCII character set

l Word length: 7 or 8 data bits, 1 or 2 stop bits, even, odd or none parity.

l Handshaking: Xon/Xoff (on receive mode only) and DSR/DTR

l Input buffer: 60KB

5.1.4 Power Requirements

l Input voltage: Switching power, 110-240 VAC, 50-60 Hz

l Output voltage: 24 VDC

l Circuit protection: 2A maximum

1 2 ... 27 28 29 30 31 32 33 34 35

Pas de commentaire

Toshiba B-443 Manuel d'utilisateur Page 32