Toshiba E-STUDIO900 Manuel d'utilisateur télécharger pdf (Page 103)

PTM 2-78 B070/B071

2.11.2 INVERTER

Feed-in and Jogging

The inverter feed roller [A] feeds paper to the jogger section. After the trailing edge of

the paper passes through the inverter feed roller, the jogger fences [B] move to square

the paper. This happens every page.

The jogger motor (a stepper motor) [C] moves the jogger fences [B] inward or

outward.

When the main switch is turned on, the jogger motor places the jogger fences at the

home position, which is determined by monitoring the signal from the jogger home

position sensor [D].

When the start key is pressed, the jogger motor positions the jogger fences 15 mm

away from the selected paper size to wait for the paper.

When the paper is delivered to the jogger fences, the jogger fences move inward to

square the paper. After this, the jogger fences move back to the previous position (15

mm away from the paper).

B070D802.WMF

B070D803.WMF

[A]

[C]

[B]

[D]

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 223 224

Pas de commentaire

Toshiba E-STUDIO900 Manuel d'utilisateur Page 103