Toshiba E-STUDIO900 Manuel d'utilisateur Page 86
- Page / 224
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
PTM 2-61 B070/B071
Toner Hopper Empty Detection
The toner hopper sensor [A] detects whether there is enough toner in the toner
hopper. The toner hopper sensor checks for toner once when the toner supply roller
clutch turns on. When there is only a small amount of toner inside the toner hopper
and pressure on the toner hopper sensor becomes low, the toner hopper sensor
outputs a pulse signal (once per copy). Then the toner bank mechanism supplies
more toner to the toner hopper, as explained in previous sections.
Spring [B] applies development bias from the developer rollers to the lower case of the
developer unit , to prevent toner from being re-attracted back to the drum.
A294D307.WMF
[A]
[B]
- TECHNICAL TRAINING 1
- PROGRAM 1
- INTRODUCTION 5
- CONTENTS 8
- IMPORTANT SAFETY NOTICES 9
- WARNING 10
- CONVENTIONS IN THIS MANUAL 11
- 1.1 SPECIFICATIONS 14
- B070/B071 1-2 PTM 15
- PTM 1-3 B070/B071 16
- 1.1.2 ADF 17
- 1.2 MACHINE CONFIGURATION 18
- 1.3 COMPONENT LAYOUT 19
- 1.3.2 ADF 20
- 1.4 PAPER PATH 21
- 1.5 COPY PROCESS 22
- B070/B071 1-10 PTM 23
- PTM 2-1 B070/B071 26
- 2.1 DOCUMENT FEEDER 26
- PTM 2-2 B070/B071 27
- 2.1.2 BOTTOM PLATE LIFT 27
- PTM 2-3 B070/B071 28
- 2.1.3 PICK-UP AND SEPARATION 28
- PTM 2-4 B070/B071 29
- 2.1.4 ORIGINAL FEED 29
- PTM 2-5 B070/B071 30
- PTM 2-6 B070/B071 31
- 2.1.6 ORIGINAL TRANSPORT 31
- PTM 2-7 B070/B071 32
- PTM 2-8 B070/B071 33
- PTM 2-9 B070/B071 34
- PTM 2-10 B070/B071 35
- PTM 2-11 B070/B071 36
- PTM 2-12 B070/B071 37
- 2.2 SCANNING 37
- 2.2.1 OVERVIEW 37
- PTM 2-13 B070/B071 38
- 2.2.2 SCANNER DRIVE 38
- PTM 2-14 B070/B071 39
- PTM 2-15 B070/B071 40
- PTM 2-16 B070/B071 41
- 2.3 IMAGE PROCESSING 41
- PTM 2-17 B070/B071 42
- 2.3.3 IMAGE PROCESSING FLOW 43
- PTM 2-19 B070/B071 44
- PTM 2-20 B070/B071 45
- 2.3.4 IMAGE PROCESSING MODES 45
- Mode Setting Function 45
- PTM 2-21 B070/B071 46
- PTM 2-22 B070/B071 47
- Item Range Default SP No 47
- PTM 2-23 B070/B071 48
- PTM 2-24 B070/B071 49
- PTM 2-25 B070/B071 50
- PTM 2-26 B070/B071 51
- PTM 2-27 B070/B071 52
- PTM 2-28 B070/B071 53
- PTM 2-29 B070/B071 54
- PTM 2-30 B070/B071 55
- 2.4 LASER EXPOSURE 55
- 2.4.1 OVERVIEW 55
- PTM 2-31 B070/B071 56
- PTM 2-32 B070/B071 57
- 2.4.3 LD SAFETY SWITCHES 57
- PTM 2-33 B070/B071 58
- PTM 2-34 B070/B071 59
- 2.4.5 POLYGON MIRROR MOTOR 59
- PTM 2-35 B070/B071 60
- 2.4.6 1200-DPI RESOLUTION 60
- Main Scan 60
- Sub Scan 60
- PTM 2-36 B070/B071 61
- 2.4.7 OPTICAL PATH 61
- PTM 2-37 B070/B071 62
- 2.5 DRUM UNIT 62
- 2.5.1 PROCESS CONTROL 62
- PTM 2-38 B070/B071 63
- 2.5.2 DRUM UNIT COMPONENTS 63
- PTM 2-39 B070/B071 64
- 2.5.3 DRUM DRIVE 64
- PTM 2-40 B070/B071 65
- 2.5.4 DRUM CHARGE 65
- PTM 2-41 B070/B071 66
- PTM 2-42 B070/B071 67
- 2.5.5 DRUM CLEANING 67
- PTM 2-43 B070/B071 68
- 2.5.6 CLEANING UNIT DRIVE 68
- PTM 2-44 B070/B071 69
- PTM 2-45 B070/B071 70
- 2.5.7 OTHERS 70
- PTM 2-46 B070/B071 71
- PTM 2-47 B070/B071 72
- PTM 2-48 B070/B071 73
- 2.6 DEVELOPMENT 73
- 2.6.1 OVERVIEW 73
- PTM 2-49 B070/B071 74
- 2.6.2 DEVELOPMENT MECHANISM 74
- PTM 2-50 B070/B071 75
- 2.6.3 DRIVE 75
- PTM 2-51 B070/B071 76
- 2.6.4 CROSSMIXING 76
- PTM 2-52 B070/B071 77
- 2.6.5 DEVELOPMENT BIAS 77
- PTM 2-53 B070/B071 78
- 2.7.1 OVERVIEW 78
- PTM 2-54 B070/B071 79
- 2.7.2 TONER BANK 79
- PTM 2-55 B070/B071 80
- PTM 2-56 B070/B071 81
- PTM 2-57 B070/B071 82
- PTM 2-58 B070/B071 83
- PTM 2-59 B070/B071 84
- PTM 2-60 B070/B071 85
- 2.7.4 TONER HOPPER 85
- PTM 2-61 B070/B071 86
- PTM 2-62 B070/B071 87
- PTM 2-63 B070/B071 88
- PTM 2-64 B070/B071 89
- 2.8 PAPER FEED 89
- 2.8.1 OVERVIEW 89
- PTM 2-65 B070/B071 90
- 2.8.2 DRIVE 90
- PTM 2-66 B070/B071 91
- 2.8.3 VERTICAL TRANSPORT 91
- PTM 2-67 B070/B071 92
- 2.8.4 PAPER REGISTRATION 92
- From the LCT 92
- PTM 2-68 B070/B071 93
- 2.9.1 OVERVIEW 93
- PTM 2-69 B070/B071 94
- PTM 2-70 B070/B071 95
- PTM 2-71 B070/B071 96
- 2.9.4 TONER COLLECTION 96
- PTM 2-72 B070/B071 97
- PTM 2-73 B070/B071 98
- 2.10 FUSING 98
- 2.10.1 OVERVIEW 98
- PTM 2-74 B070/B071 99
- PTM 2-75 B070/B071 100
- PTM 2-76 B070/B071 101
- Area Near-End Web Remaining 101
- PTM 2-77 B070/B071 102
- 2.11 PAPER EXIT/DUPLEX 102
- 2.11.1 OVERVIEW 102
- PTM 2-78 B070/B071 103
- 2.11.2 INVERTER 103
- PTM 2-79 B070/B071 104
- PTM 2-80 B070/B071 105
- PTM 2-81 B070/B071 106
- PTM 2-82 B070/B071 107
- PTM 2-83 B070/B071 108
- PTM 2-84 B070/B071 109
- PTM 2-85 B070/B071 110
- 2.12.1 OVERVIEW 110
- 2.12.2 ENERGY SAVER MODE 111
- 2.12.3 LOW POWER MODE 112
- 2.12.4 AUTO OFF MODE 113
- 2.12.5 NIGHT MODE 114
- 3. SERVICE TABLES 117
- Using the SP Mode 118
- Direct Entry 118
- Button Selection Entry 118
- SP Mode Button Summary 119
- SP1-nnn Feed 120
- 3.3 USER PROGRAM MODE 121
- 4. INSTALLATION 125
- 4.1.2 MACHINE LEVEL 126
- B070I410.WMF 127
- B070I023.WMF 127
- 4.1.4 DIMENSIONS 128
- CAUTION 129
- 4.2 COPIER (B070/B071) 130
- PTM 4-7 B070/B071 131
- 1/2"x11" LEF, A5 134
- 1/2"x81/2" 134
- B070/B071 5-2 PTM 135
- PTM 5-3 B070/B071 136
- B070/B071 5-4 PTM 137
- 5.4 DRIVE LAYOUT 138
- 5.5 DETAILED DESCRIPTIONS 139
- 5.5.2 PICK-UP AND FEED 140
- 5.5.3 PICK-UP AND FEED 141
- PTM 5-9 B070/B071 142
- 5.6 PAPER LIFT 143
- 5.6.3 LIFT SENSOR 144
- 5.7 PAPER SIZE DETECTION 145
- PTM 5-13 B070/B071 146
- 5.9 PAPER END DETECTION 147
- Upper Tray 150
- Lower Tray 150
- Proof Tray 150
- Staple Specifications 151
- 6.2 PUNCH UNIT (B377) 152
- B070/B071 6-4 PTM 153
- 6.4 DRIVE LAYOUT 154
- B070/B071 6-6 PTM 155
- 6.5 DETAILED DESCRIPTIONS 156
- 6.5.2 PRE-STACKING 157
- Overview 158
- 6.5.4 UPPER TRAY 159
- 6.5.5 LOWER TRAY 160
- Lower Tray Full 161
- 6.5.6 SHIFT MECHANISM 162
- 6.5.7 PAPER POSITIONING 163
- 6.5.8 STAPLER 164
- 6.5.9 STAPLER MOVEMENT 165
- Rotational Stapler Movement 166
- 6.5.10 FEED OUT 167
- 6.5.11 BOOKLET FINISHING 168
- 6.5.13 INITIAL FOLDING 169
- PTM 6-21 B070/B071 170
- 6.6.1 PUNCH DRIVE MECHANISM 171
- PTM 6-23 B070/B071 172
- 6.6.2 PUNCH WASTE COLLECTION 173
- 7.1 SPECIFICATION 176
- 1/2" x 81/2" SEF 177
- 1/2" x11" LEF 177
- 1/2" x 11" LEF 177
- 1/2" x 11" SEF 178
- PTM 7-5 B070/B071 180
- Symbol Name Function 181
- SENSORS 181
- B070/B071 7-8 PTM 183
- 7.4 DRIVE LAYOUT 184
- 7.5 DETAILED DESCRIPTIONS 185
- 7.5.2 PAPER PRE-STACKING 186
- B070/B071 7-12 PTM 187
- 7.5.4 STAPLER UNIT MOVEMENT 188
- Rotation (1) 189
- Rotation (2) 189
- 7.5.5 STAPLER 190
- B070/B071 7-16 PTM 191
- 7.5.6 FEED-OUT 192
- 7.5.7 PAPER EXIT STACKING 193
- 7.5.8 SHIFT TRAY 194
- Sort/Stack Mode (Shift Mode) 195
- Staple Mode 195
- PTM 7-21 B070/B071 196
- B070/B071 7-22 PTM 197
- 7.6 JAM CONDITIONS 198
- 7.7.1 PUNCH UNIT DRIVE 199
- 7.7.2 PUNCH WASTE COLLECTION 200
- B070/B071 7-26 PTM 201
- 7.8.2 JOGGER UNIT DRIVE 202
- 1/2" x 81/2" 205
- 8.2.1 MAIN LAYOUT 206
- 8.2.2 DRIVE LAYOUT 207
- 8.3 DETAILED DESCRIPTIONS 208
- 8.3.2 PAPER FEED 209
- 8.3.3 PAPER SIZE DETECTION 210
- : Cannot be corrected 211
- B070/B071 8-8 PTM 212
- 9.1 SPECIFICATION 215
- B070/B071 9-2 PTM 216
- PTM 9-3 B070/B071 217
- B070/B071 9-4 PTM 218
- 9.4 DRIVE LAYOUT 219
- 9.5 DETAILED DESCRIPTIONS 220
- 9.5.2 PAPER FEED 221
- 9.5.3 PAPER SIZE DETECTION 222
- B070/B071 9-10 PTM 224
© 2020, manymanuals.fr. Tous droits réservés | 2.759 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels