Toshiba XLTR-200 Manuel d'utilisateur télécharger pdf (Page 35)

Toshiba Point Attributes

Figure 14: Edit Toshiba Attributes

• Edit Address: Menu selection 1 allows you to edit the network

address of the Toshiba ASD that this point refers to. This address

field is only used in conjunction with the Toshiba RS485 protocol:

Toshiba common-serial port connections are point-to-point, and

therefore do not require targeting a drive at a specific address.

• Edit Parameter: Menu selection 2 allows you to edit the Toshiba

ASD parameter that this point will access. Figure 14 shows an

example of how to change the current setting of FA00 to FA04 (which

would be a typical change if the Toshiba RS485 protocol were to be

used with this point). Note that Toshiba parameter values must be

entered in hexadecimal format.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 98 99

Pas de commentaire

Toshiba XLTR-200 Manuel d'utilisateur Page 35