Toshiba XLTR-200 Manuel d'utilisateur télécharger pdf (Page 39)

Metasys N2 Point Attributes

Figure 18: Edit Metasys N2 Attributes

• Edit Object Type: Menu selection 1 allows modification of the object

type. Figure 18 shows an example of how to change the current

setting of AI to AO.

• Edit Object Number: Menu selection 2 allows modification of the

object number. The current configuration as indicated in Figure 18

shows that point #1 is configured to be AI #1.

• Edit Multiplier: Menu selection 3 allows modification of the multiplier

to be used with analog (AI or AO) objects. This setting has no effect

when the point is configured to be a binary (BI or BO) object.

• Edit Bit Mask: Menu selection 4 allows modification of the bit mask

to be used with binary (BI or BO) objects. This setting has no effect

when the point is configured to be an analog (AI or AO) object. Note

that the bit mask is displayed and entered as a hexadecimal value

(e.g. to mask bits #15 and #10, a value of “8400” must be entered).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 98 99

Pas de commentaire

Toshiba XLTR-200 Manuel d'utilisateur Page 39